This is a Remote Safety Ignitor (Remote Glow Ignitor) for In-Cowl Engines. This provides an external glow driver socket that is wired directly to the actual glow plug and grounded to one engine head bolt.

FEATURES

• Designed to clip onto glow plugs that are recessed far down into the cylinder heads.
• Can be used on any single-cylinder engine.
• For use with any car, helicopter, plane or boat where the glow plug is in a hard to reach spot or is close to a propellor.
• Dust cover is attached with a pin and rotates left or right, opening so glow driver can be inserted into the recessed socket.
• The ignitor socket is made of black plastic.

INCLUDES

• One Pre-Assembled Recessed Remote Safety Ignitor with Attached Dust Cover

REQUIREMENTS

• Cutting a hole to mount the external socket.
• Cementing the housing in the hole using CA or epoxy glue.

SPECIFICATIONS

• Mounting Hole For External Socket: 11/16"
• Wire Length: 23-1/2"

COMMENTS

Difference between standard and recessed ignitors:

"remote safety ignitor" glow plug wire has a loop with another wire

crossing through it. Looks kind of like this: @

"remote safety ignitor for recessed glo-plugs" glow plug wire has

two wires in a opposing V shape. Looks kind of like this: ><